Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Aoyagi, Kazuhei; Ishii, Eiichi
Environmental Earth Sciences, 83(3), p.98_1 - 98_15, 2024/02
Times Cited Count：0 Percentile：0.04(Environmental Sciences)The long-term geological disposal of high-level radioactive waste relies on predictions of future changes in a disposal facility's hydro-mechanical characteristics to assess potential leakage through fractures in the excavation damaged zone (EDZ) after backfilling the facility. This study evaluated the transmissivity of EDZ fractures using in situ hydraulic tests around the area of a full-scale, experimental, engineered barrier system in the Horonobe Underground Research Laboratory, Hokkaido, Japan. After their installation, the buffer blocks swelled, altering the stresses within the EDZ fractures. The effects of these changing stresses on the fractures' transmissivity were assessed over a period of 4 years. The transmissivity continuously decreased in this period to about 41% of its value measured prior to the swelling. Using the Barton-Bandis normal-stress-dependent fracture-closure model, the decrease in transmissivity is quantitatively attributed to closure of the EDZ fractures, which was caused by the swelling pressure increasing up to 0.88 MPa. Evidence of fracture closure came from seismic tomography surveying, which revealed a slight increase in seismic velocity in the study area with increasing swelling pressure. The results show that EDZ fractures were closed by swelling of the full-scale buffer material. They also demonstrate the applicability of the Barton-Bandis model to preliminary estimation of the long-term transmissivity of EDZ fractures in facilities for the geological disposal of radioactive waste.
Terada, Hiroaki
Ten Hasseigen Karano Mesosukeru Kakusan Shumireshon; Fukushima Daiichi Genshiryoku Hatsudensho Jiko O Fumaete (Kisho Kenkyu Noto Dai-248-Go), p.115 - 121, 2023/09
no abstracts in English
Iwamoto, Hiroki; Nakano, Keita*; Meigo, Shinichiro; Takeshita, Hayato; Maekawa, Fujio
EPJ Web of Conferences, 284, p.01033_1 - 01033_4, 2023/05
Times Cited Count：0 Percentile：0.21(Nuclear Science & Technology)no abstracts in English
Yoshimura, Kazuo; Doda, Norihiro; Fujisaki, Tatsuya*; Igawa, Kenichi*; Tanaka, Masaaki; Yamano, Hidemasa
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 10 Pages, 2023/05
The benchmark analyses for the unprotected loss of heat sink (ULOHS) tests in the pool-type experimental SFR in the United States, EBR-II (BOP-301 and BOP-302R) have been conducted in order to validate the evaluation method of the reactivity feedback equipped in the plant dynamics analysis code named Super-COPD. In this study, 1D-CFD coupled analyses adding the core bowing reactivity model were conducted. Through the analysis, the applicability of the modified reactivity model was confirmed for the BOP-301 test. For the BOP-302R test, consideration of the core restraint system in the core and modeling the control rod driveline expansion reactivity was indicated.
Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Sugihara, Kenta; Nishio, Katsuhisa; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; et al.
Journal of Nuclear Science and Technology, 60(4), p.435 - 449, 2023/04
Times Cited Count：3 Percentile：68.71(Nuclear Science & Technology)Double-differential thick target neutron yields (TTNYs) for Fe, Pb, and Bi targets induced by 107-MeV protons were measured using the fixed-field alternating gradient accelerator at Kyoto University for research and development of accelerator-driven systems (ADSs) and fundamental ADS reactor physics research at the Kyoto University Critical Assembly (KUCA). Note that TTNYs were obtained with the time-of-flight method using a neutron detector system comprising eight neutron detectors; each detector has a small NE213 liquid organic scintillator and photomultiplier tube. The TTNYs obtained were compared with calculation results using Monte Carlo-based spallation models (i.e., INCL4.6/GEM, Bertini/GEM, JQMD/GEM, and JQMD/SMM/GEM) and the evaluated high-energy nuclear data library, i.e., JENDL-4.0/HE, implemented in the particle and heavy iontransport code system (PHITS). All models, including JENDL-4.0/HE, failed to predict high-energy peaks at a detector angle of 5
. Comparing the energy- and angle-integrated spallation neutron yields at energies of 
20 MeV estimated using the measured TTNYs and the PHITS indicated that INCL4.6/GEM would be suitable for the Monte Carlo transport simulation of ADS reactor physics experiments at the KUCA.
Suzuki, Hideaki*; Takayama, Yusuke; Sato, Hisashi*; Watahiki, Takanori*; Sato, Daisuke*
JAEA-Research 2022-013, 41 Pages, 2023/03
JAEA-Research-2022-013.pdf:3.99MB
It is anticipated that the coupled thermal-hydraulic-mechanical and chemical (THMC) processes will occur, involving an interactive process with radioactive decay heat arising from the vitrified waste, infiltration of groundwater from the host rock into the buffer material, swelling pressure of buffer material due to its saturation and chemical reaction between bentonite and pore-water in the near-field of a geological disposal system for high-level radioactive waste repository. In order to evaluate these phenomena in the near-field, the THMC model has been developed. In this study, For the purpose of evaluating the near-field infiltration behavior in seawater-type groundwater environment, a hydraulic model was set in which the permeability of the buffer material change depending on the salt concentration in the pore-water. In order to evaluate the drying phenomenon of the buffer material due to waste heat, a temperature gradient water transfer model was set in consideration of the dependence of temperature and pore-water saturation. The THMC analysis of the in-situ experiment of engineered barrier system (EBS) experiment at the Horonobe Underground Research Laboratory was carried out. The validity of the model was then checked through comparison with measured data.
Kirita, Fumio; Tominaga, Masahiro; Yamazaki, Toshihiko; Seshimo, Kazuyoshi; Uryu, Mitsuru
JAEA-Research 2022-006, 61 Pages, 2023/02
JAEA-Research-2022-006.pdf:6.24MB
Nuclear Fuel Cycle Engineering Laboratories (NCL) has been observing ground motion for a long time. On the border from northern Ibaraki prefecture to Fukushima prefecture, inland crustal earthquakes occur less frequently until the 2011 off the Pacific coast of Tohoku Earthquake (hereinafter referred to as Tohoku Earthquake). After Tohoku Earthquake, aftershocks have become more frequent in this area, and in the Hamadori region of Fukushima earthquake that a remarkable long periodic component was observed in the NCL seismic observation record. Until now there were no such things that long periodic components were observed at the observation points near the epicenter of April 2011 Fukushima earthquake, but it was thought basin structure in deep basement around the NCL affected the propagation process to NCL by reflection survey result. As basement structure of NCL affected the seismic wave propagation process, the seismic wave repeatedly reflects and refracts. For that reason, long periodic components of seismic waves may be possibly amplified. In this study, in order to refine the long periodic ground motion evaluation, using a three dimensional ground structure model (3D model) that can reflect the shape of the deep basement structure around the NCL. When modeling 3D ground structure which has a width of about 80km and a length of about 110km and ranges from the epicenter area of April 2011 Fukushima earthquake to the northern coastal area of Ibaraki prefecture modeled, improved the optimum ground structure model using multiple observation records and performed simulation analysis.
Onodera, Naoyuki; Idomura, Yasuhiro; Hasegawa, Yuta; Nakayama, Hiromasa
Dai-36-Kai Suchi Ryutai Rikigaku Shimpojiumu Koen Rombunshu (Internet), 3 Pages, 2022/12
We have developed a wind simulation code named CityLBM to realize wind digital twins. Mesoscale wind conditions are given as boundary conditions in CityLBM by using a nudging data assimilation method. It is found that conventional approaches with constant nudging coefficients fail to reproduce turbulent intensity in long time simulations, where atmospheric stability conditions change significantly. We propose a dynamic parameter optimization method for the nudging coefficient based on an ensemble Kalman filter. CityLBM was validated against plume dispersion experiments in the complex urban environment of Oklahoma City. The nudging coefficient was updated to reduce the error of the turbulent intensity between the simulation and the observation. The mean error of velocity variance is reduced by 
10% compared to the conventional nudging method with a constant nudging coefficient.
rays in the 
Sn(
)
Sn reactionEndo, Shunsuke; Okudaira, Takuya*; Abe, Ryota*; Fujioka, Hiroyuki*; Hirota, Katsuya*; Kimura, Atsushi; Kitaguchi, Masaaki*; Oku, Takayuki; Sakai, Kenji; Shima, Tatsushi*; et al.
Physical Review C, 106(6), p.064601_1 - 064601_7, 2022/12
Times Cited Count：2 Percentile：52.69(Physics, Nuclear)no abstracts in English
Aihara, Jun; Kuroda, Masatoshi*; Tachibana, Yukio
Mechanical Engineering Journal (Internet), 9(4), p.21-00424_1 - 21-00424_13, 2022/08
It is important to improve oxidation resistance of fuel for huge oxygen ingress into core to improve safety of high temperature gas-cooled reactors (HTGRs), because almost volume of cores of HTGRs consist of graphite. In this study, simulated oxidation resistant fuel elements, of which matrix is mixture of SiC and graphite, has been fabricated by hot press method. In order to maintain structural integrity of fuel element under accident conditions, high-strength fuel elements should be developed. In order to identify optimal hot press conditions for preparing high-strength fuel elements, effect of hot press conditions on mechanical strength properties of fuel elements should be evaluated quantitatively. In the present study, response surface model, which represents relationship between hot press conditions and mechanical strength properties, has been constructed by introducing statistical design of experiments (DOE) approaches, and optimal hot press conditions were estimated by model.
3(111) and 5(0-13) grain boundaries of 
-ironEbihara, Kenichi; Suzudo, Tomoaki
Metals, 12(4), p.662_1 - 662_10, 2022/04
Times Cited Count：2 Percentile：32.54(Materials Science, Multidisciplinary)Phosphorus atoms in steels accumulate at grain boundaries via thermal and/or irradiation effects and induce grain boundary embrittlement. Quantitative prediction of phosphorus segregation at grain boundaries under various temperature and irradiation conditions is therefore essential for preventing embrittlement. To develop a model of grain boundary phosphorus segregation in -iron, we studied the migration of a phosphorus atom in two types of symmetrical tilt grain boundaries (3[1-10](111) and 5[100](0-13) grain boundaries) using molecular dynamics simulations with an embedded atom method potential. The results revealed that, in the 3 grain boundary, phosphorus atoms migrate three-dimensionally mainly in the form of interstitial atoms, whereas in the 5 grain boundary, these atoms migrate one-dimensionally mainly via vacancy-atom exchanges. Moreover, de-trapping of phosphorus atoms and vacancies was investigated.
Iwamoto, Hiroki
JAEA-Conf 2021-001, p.24 - 29, 2022/03
Various spallation reaction models have been developed for the use of neutronic and shielding design of high-energy accelerator facilities such as J-PARC and ADS. However, their complicated theory for the de-excitation process has made improving their prediction accuracy difficult. In particular, it has been pointed out that the conventional models underestimate the yield of the spallation products produced from the fission reaction. This work has thus aimed to model the probability was described using a simpler, systematic expression, and then confirmed to predict fission cross sections for various incident energies and target nuclei with improved accuracy [1]. In this presentation, we will present the description of our model and research results. [1] H. Iwamoto and S. Meigo, "Unified description of the fission probability for highly excited nuclei", Journal of Nuclear Science and Technology, 56:2, 160-171 (2019).
Onodera, Naoyuki; Idomura, Yasuhiro; Hasegawa, Yuta; Nakayama, Hiromasa
Dai-35-Kai Suchi Ryutai Rikigaku Shimpojiumu Koen Rombunshu (Internet), 3 Pages, 2021/12
A detailed wind simulation is very important for designing smart cities. Since a lot of tall buildings and complex structures make the air flow turbulent in urban cities, large-scale CFD simulations are needed. We develop a GPU-based CFD code based on a Lattice Boltzmann Method (LBM) with a block-based Adaptive Mesh Refinement (AMR) method. In order to reproduce real wind conditions, the wind condition and ground temperature of the mesoscale weather forecasting model are given as boundary conditions. In this research, a surface heat flux model based on the Monin-Obukhov similarity theory was introduced to improve the calculation accuracy. We conducted a detailed wind simulation in Oklahoma City. By executing this computation, wind conditions in the urban area were reproduced with good accuracy.
Moriguchi, Yuichi*; Sato, Yosuke*; Morino, Yu*; Goto, Daisuke*; Sekiyama, Tsuyoshi*; Terada, Hiroaki; Takigawa, Masayuki*; Tsuruta, Haruo*; Yamazawa, Hiromi*
KEK Proceedings 2021-2, p.21 - 27, 2021/12
no abstracts in English
Hashimoto, Shoji*; Tanaka, Taku*; Komatsu, Masabumi*; Gonze, M.-A.*; Sakashita, Wataru*; Kurikami, Hiroshi; Nishina, Kazuya*; Ota, Masakazu; Ohashi, Shinta*; Calmon, P.*; et al.
Journal of Environmental Radioactivity, 238-239, p.106721_1 - 106721_10, 2021/11
Times Cited Count：11 Percentile：56.59(Environmental Sciences)This study was aimed at analysing performance of models for radiocesium migration mainly in evergreen coniferous forest in Fukushima, by inter-comparison between models of several research teams. The exercise included two scenarios of countermeasures against the contamination, namely removal of soil surface litter and forest renewal, and a specific konara oak forest scenario in addition to the evergreen forest scenario. All the models reproduced trend of time evolution of radiocesium inventories and concentrations in each of the components in forest such as leaf and organic soil layer. However, the variations between models enlarged in long-term predictions over 50 years after the fallout, meaning continuous field monitoring and model verification/validation is necessary.
random mediaAraki, Shohei; Yamane, Yuichi; Ueki, Taro; Tonoike, Kotaro
Nuclear Science and Engineering, 195(10), p.1107 - 1117, 2021/10
Times Cited Count：2 Percentile：31.78(Nuclear Science & Technology)Criticality control of random media such as fuel debris is one of the most important safety issues in post-accident management. 
spectrum randomizing model is expected to simulate such random media because it is well known that the noise can describe a diverse range of random and disordered natural phenomena. In this paper, we focused on the relationship between the multiplication factor and moderation condition in the random media. A number of random media were realized with the spectrum randomizing model that is based on the Randomized Weierstrass function (RWF). The volume ratio of concrete to fuel was adopted as an index for the moderation condition. The multiplication factors were calculated with a two-energy group Monte Carlo calculation. The calculation results were analyzed by using variance, skewness, and kurtosis. Those statistical parameters had an extreme value around the optimum moderation condition. This result suggested that it is possible to predict the rough trend of variation range, distortion, and outlier of multiplication factors in the random media.
Sakai, Toshihiro; Ishii, Eiichi
JAEA-Data/Code 2021-009, 13 Pages, 2021/08
JAEA-Data-Code-2021-009.pdf:1.9MB
JAEA-Data-Code-2021-009-appendix(CD-ROM).zip:42.79MB
Japan Atomic Energy Agency is performing the Horonobe Underground Research Laboratory Project, which includes a scientific study of the deep geological environment as a basis of research and development for the geological disposal of high level radioactive wastes, in order to establish comprehensive techniques for the investigation, analysis and assessment of the deep geological environment in the sedimentary rock. The numerical data of 3D geological model in regional-scale was compiled in 2019 as JAEA-Data/Code 2019-007, and then this report updates a part of the numerical data of 3D geological model around the underground facilities.
Onoe, Hironori; Ishibashi, Masayuki*; Ozaki, Yusuke; Iwatsuki, Teruki
International Journal of Rock Mechanics and Mining Sciences, 144, p.104737_1 - 104737_14, 2021/08
Times Cited Count：4 Percentile：34.69(Engineering, Geological)In this study, we investigated the methodology of modeling for fractured granite around the drift at a depth of 500 m in the Mizunami Underground Laboratory, Japan as a case study. As a result, we developed the fracture modeling method to estimate not only geological parameters of fractures but also hydraulic parameters based on the reproducibility of trace length distribution of fractures. By applying this modeling method, it was possible to construct a Discrete Fracture Network (DFN) model that can accurately reproduce the statistical characteristics of fractures.
Terada, Hiroaki; Nagai, Haruyasu
Isotope News, (775), p.44 - 48, 2021/06
no abstracts in English
Kano, Koichi*; Hagiwara, Satoshi*; Igarashi, Takahiro; Otani, Minoru*
Electrochimica Acta, 377, p.138121_1 - 138121_10, 2021/05
Times Cited Count：17 Percentile：71.29(Electrochemistry)We investigated the free corrosion potential at an interface between an Al electrode and an aqueous NaCl solution under acidic conditions via density functional theory combined with the effective screening medium and reference interaction site model (ESM-RISM). The electrode potentials for the anodic and cathodic corrosion reactions were obtained from the grand potential profile as a function of the electron chemical potential at the interface. Thereafter, we determined the free corrosion potential using the Tafel extrapolation method. The results of the free corrosion potential were consistent with previous experimental data. By controlling the pH, we determined the pH dependence of the free corrosion potential, and the results agreed well with the experimental results. Our results indicated that the ESM-RISM method duly described the environmental effect of an acidic solution and precisely determined the free corrosion potential.
